Copyright (C) 1994-2000 Marc Feeley.
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the copyright holder.
The Gambit programming system is a full implementation of the Scheme
language which conforms to the R4RS and IEEE Scheme standards. It
consists of two programs: gsi, the Gambit Scheme interpreter,
and gsc, the Gambit Scheme compiler.
Gambit-C is a version of the Gambit system in which the compiler generates portable C code, making the whole Gambit-C system and the programs compiled with it easily portable to many computer architectures for which a C compiler is available.
For the most up to date information on Gambit and add-on packages please check the Gambit web page at `http://www.iro.umontreal.ca/~gambit' or send mail to `gambit@iro.umontreal.ca'.
Bug reports should be sent to `gambit@iro.umontreal.ca'.
Unless the system was built with the command `make FORCE_STATIC_LINK=yes', Gambit's runtime library is normally a shared-library which is installed in `/usr/local/lib' under UNIX. This directory must be in the path searched by the system for shared-libraries. This path is normally specified through an environment variable which is `LD_LIBRARY_PATH' on most versions of UNIX, `LIBPATH' on AIX, `SHLIB_PATH' on HPUX, and `PATH' on Windows-NT/95. If the shell is of the `sh' family, the setting of the path can be made for a single execution by prefixing the program name with the environment variable assignment, as in:
% LD_LIBRARY_PATH=/usr/local/lib gsi
A similar problem exists with the Gambit header file `gambit.h', normally installed in `/usr/local/include', which is needed for compiling Scheme programs with the Gambit-C compiler. If the C compiler does not normally search `/usr/local/include' it will be necessary to place `gambit.h' in `/usr/include'.
A simple solution to give access to both of these files is to create a link to them in the appropriate directories, i.e.
ln -s /usr/local/lib/libgambc.so /usr/lib ; actual name of library may vary ln -s /usr/local/include/gambit.h /usr/include
Synopsis:
gsi [-:runtimeoption,...] [-f] [-i] [-e expressions] [file...]
The interpreter is executed in interactive mode when no command line argument is given other than options and the input does not come from a pipe. Pipe mode is when no command line argument is given and the input comes from a pipe. Finally, batch mode is when command line arguments are present. The `-i' option is ignored by the interpreter. The `-e' option may appear multiple times and must be after the `-f' and `-i' options. In all modes the expressions specified after each `-e' are evaluated from left to right in the interaction environment.
In this mode the interpreter starts a read-eval-print loop (REPL) to interact with the user. The system prompts the user for a command, reads the command from standard input and executes it, sending any output generated including error messages to standard output.
The commands entered by the user are typically Scheme expressions that
are to be evaluated. These expressions are evaluated in the global
interaction environment. The REPL adds to this environment any
definition entered using the define and define-macro
special forms.
Once the evaluation of an expression is completed, the result of
evaluation is written to standard output unless it is the special
"void" object. This object is returned by most procedures and special
forms which the standard defines as returning an unspecified value
(e.g. write, set!, define).
The evaluation of an expression may stop before it is completed for the following reasons:
(step) was evaluated.
When an evaluation stops, a message is displayed indicating the reason and location where the evaluation was stopped. The location information includes, if known, the name of the procedure where the evaluation was stopped and the source code location in the format `stream@line.column', where stream is either `(stdin)' if the expression was obtained from standard input or a string naming a file.
A nested REPL is then initiated in the context of the point of execution where the evaluation was stopped. The nested REPL's continuation and evaluation environment are the same as the point where the evaluation was stopped. This allows the inspection of the evaluation context, which is particularly useful to determine the location and cause of an error.
The prompt of nested REPLs includes the nesting level. An end of file (usually ^D on UNIX and ^Z on MSDOS and Windows-NT/95) will cause the current REPL to be aborted and the enclosing REPL (one nesting level less) to be resumed.
At any time the user can examine the frames in the REPL's continuation,
which is useful to determine which chain of procedure calls lead to an
error. Expressions entered at a nested REPL are evaluated in the
environment of the continuation frame currently being examined if that
frame was created by interpreted Scheme code. If the frame was created
by compiled Scheme code then expressions get evaluated in the global
interaction environment. This feature may be used in interpreted code
to fetch the value of a variable in the current frame or to change its
value with set!. Note that some special forms (define in
particular) can only be evaluated in the global interaction environment.
In addition to expressions, the REPL accepts the following special "comma" commands:
,?
,q
,t
,d
,(c expr)
,c
,s
set-step-level!) and then stop,
causing a nested REPL to be entered. Just before the evaluation step is
performed, a line is displayed (in the same format as trace)
which indicates the expression that is being evaluated. If the
evaluation step produces a result, the result is also displayed on
another line. A nested REPL is then entered after displaying a message
which describes the next step of the computation. This command must
only be used to continue a computation that was stopped due to a user
interrupt, breakpoint or a single-step.
,l
,n
,+
,-
,y
,b
,i
,e
Here is a sample interaction with gsi:
% gsi Gambit Version 4.0 alpha 1 > (define (f x) (let* ((y 10) (z (* x y))) (- x z))) > (define (g n) (if (> n 1) (+ 1 (g (/ n 2))) (f 'oops))) > (g 8) *** ERROR IN (stdin)@1.32 -- NUMBER expected (* 'oops 10) 1> ,i #<procedure f> = (lambda (x) (let ((y 10)) (let ((z (* x y))) (- x z)))) 1> ,b 0 f (stdin)@1:32 (* x y) 1 g (stdin)@2:32 (g (/ n 2)) 2 g (stdin)@2:32 (g (/ n 2)) 3 g (stdin)@2:32 (g (/ n 2)) 4 (interaction) (stdin)@3:1 (g 8) 5 ##initial-continuation 1> ,e y = 10 x = oops 1> ,+ 1 g (stdin)@2.32 (g (/ n 2)) 1-1> ,e n = 2 1-1> ,+ 2 g (stdin)@2.32 (g (/ n 2)) 1-2> ,e n = 4 1-2> ,+ 3 g (stdin)@2.32 (g (/ n 2)) 1-3> ,e n = 8 1-3> ,0 0 f (stdin)@1.32 (* x y) 1> (set! x 1) 1> ,e y = 10 x = 1 1> ,(c (* x y)) -6 > ,q
In pipe mode the interpreter evaluates the expressions read from standard input in the global interaction environment and writes each result on a separate line on standard output. Evaluation errors cause the interpreter to exit. Error messages are sent to standard error.
For example, under UNIX:
% echo "(sqrt (read)) 9 (expt 2 100)" | gsi 3 1267650600228229401496703205376
In batch mode the command line arguments designate files to be loaded.
The interpreter loads these files in left-to-right order using the
load procedure. The files can have no extension, or the
extension `.scm' or `.on' where n is a positive
integer that acts as a version number (the `.on' extension
is used for object files produced by gsc). When the file name
has no extension the load procedure first attempts to load the
file with no extension as a Scheme source file. If that file doesn't
exist it completes the file name with a `.on' extension
with the highest consecutive version number starting with 1, and loads
that file as an object file. If that file doesn't exist the file name
is completed with a `.scm' extension and the file is loaded as a
Scheme source file.
A special case is the argument `-' which designates the standard input. If the standard input comes from a pipe, it is treated as a Scheme source file. Otherwise, a REPL is started so that the user can interact with the interpreter. Note that `-' can appear multiple times on the command line, which is useful for debugging.
The interpreter exits after loading the files or as soon as an error occurs. Input is taken from standard input and any output generated is sent to standard output except for error messages which go to standard error.
For example, under UNIX:
% cat m1.scm (display "hello") (newline) % cat m2.scm (display "world") (newline) % gsi m1 m2 hello world % gsi m1 - m2 - hello > (define display write) > ,(c 0) "world" > (+ 1 2) 3 > ,q % echo "(write 123)(newline)" | gsi - 123 % echo "(write 123)(newline)" | gsi 123#<void> #<void>
There are two ways to customize the interpreter. When the interpreter starts off it tries to execute a `(load "~~/gambc")' (for an explanation of how file names are interpreted see section Handling of file names). An error is not signaled if the file does not exist. Interpreter extensions and patches that are meant to apply to all users and all modes should go in that file.
Extensions which are meant to apply to a single user or to a specific
directory are best placed in the initialization file, which is a
file containing Scheme code. In all modes, the interpreter first tries
to locate the initialization file by searching the following locations:
`gambc.scm' and `~/gambc.scm'. The first file that is found
is examined as though the expression (include
initialization-file) had been entered at the read-eval-print loop
where initialization-file is the file that was found. Note that
by using an include the macros defined in the initialization file
will be visible from the read-eval-print loop (this would not have been
the case if load had been used). The initialization file is not
searched for or examined if the `-f' option is specified.
Under UNIX, the status is 0 when the interpreter exits normally and is 1 when the interpreter exits due to an error.
For example, if the shell is sh:
% echo "(/ 1 0)" | gsi *** ERROR IN (stdin)@1.1 -- Division by zero (/ 1 0) % echo $? 1
Gambit's load procedure treats specially any Scheme source file
beginning with the token `#!'. The load procedure discards
the rest of the line and then loads the rest of the file normally. If
this file is being loaded because it is an argument on the interpreter's
command line, then the interpreter is terminated after loading the file.
This feature can be used under UNIX to write Scheme scripts by simply
prefixing a file of Scheme code with a line containing `#!
/usr/local/bin/gsi' (note the space between the `#!' and the
`/usr/local/bin/gsi' so that the `#!' token is read properly
by gsi). When such a script is executed, the script's file
name followed by the script's command line arguments are added to the
arguments passed to the interpreter. Thus, the interpreter will be
run in batch mode and the interpreter will call load with the
script's file name as argument. The script's arguments can be
accessed by calling the procedure argv. This nullary procedure
returns the script's file name and its arguments as a list of strings.
For example:
% cat upto
#! /usr/local/bin/gsi -f
(define (usage) (display "usage: upto n") (newline))
(if (not (= (length (argv)) 2))
(usage)
(let ((n (string->number (list-ref (argv) 1))))
(if (and n (exact? n) (integer? n))
(let loop ((i 1))
(if (<= i n)
(begin (write i) (newline) (loop (+ i 1)))))
(usage))))
% upto 3
1
2
3
On some versions of UNIX it is necessary to prefix the Scheme source code in the following way:
#! /bin/sh ":";exec gsi -f $0 $* (write (argv)) (newline)
An interesting application of Scheme scripts is to implement CGI scripts. Here is a sample CGI script that maintains a counter that is incremented each time the CGI script is accessed:
#! /usr/local/bin/gsi -f (define n (+ 1 (with-input-from-file "counter" read))) (with-output-to-file "counter" (lambda () (write n))) (display "Content-type: text/html") (newline) (newline) (display "Access #") (display n) (newline)
Synopsis:
gsc [-:runtimeoption,...] [-f] [-i] [-e expressions] [-prelude expressions]
[-postlude expressions] [-verbose] [-report] [-expansion] [-gvm] [-debug]
[-o output] [-c] [-dynamic] [-flat] [-l base] [file...]
When no command line argument is present other than options the
compiler behaves like the interpreter. This means that interactive
mode is selected if the input does not come from a pipe, otherwise
pipe mode is selected. In these modes, the only difference with the
interpreter is that some additional predefined procedures are
available (notably compile-file).
Just like the interpreter, the compiler will examine the initialization file unless the `-f' option is specified.
In batch mode gsc takes a set of file names (either with
`.scm', `.c', or no extension) on the command line and
compiles each Scheme source file into a C file. File names with no
extension are taken to be Scheme source files and a `.scm'
extension is automatically appended to the file name. For each Scheme
source file `file.scm', the C file `file.c'
stripped of its directory will be produced (i.e. the C file is created
in the current working directory).
The C files produced by the compiler serve two purposes. They will have to be compiled by a C compiler to generate object files, and also they contain information to be read by Gambit's linker to generate a link file. The link file is a C file that collects various linking information for a group of modules, such as the set of all symbols and global variables used by the modules. The linker is automatically invoked unless the `-c' or `-dynamic' options appear on the command line.
Compiler options must be specified before the first file name and after the `-:' runtime option (see section Runtime options for all programs). If present, the `-f' and `-i' compiler options must come first. The available options are:
-f
-i
-e expressions
-prelude expressions
-postlude expressions
-verbose
-report
-expansion
-gvm
-debug
-o output
-c
-dynamic
-flat
-l base
The `-i' option forces the compiler to process the remaining command line arguments like the interpreter.
The `-e' option evaluates the specified expressions in the interaction environment.
The `-prelude' option adds the specified expressions to the top of the source code being compiled. The main use of this option is to supply declarations on the command line. For example the following invocation of the compiler will compile the file `bench.scm' in unsafe mode:
% gsc -prelude "(declare (not safe))" bench.scm
The `-postlude' option adds the specified expressions to the bottom of the source code being compiled. The main use of this option is to supply the expression that will start the execution of the program. For example:
% gsc -postlude "(main)" bench.scm
The `-verbose' option displays on standard output a trace of the compiler's activity.
The `-report' option displays on standard output a global variable usage report. Each global variable used in the program is listed with 4 flags that indicate if the global variable is defined, referenced, mutated and called.
The `-expansion' option displays on standard output the source code after expansion and inlining by the front end.
The `-gvm' option generates a listing of the intermediate code for the "Gambit Virtual Machine" (GVM) of each Scheme file on `file.gvm'.
The `-debug' option causes debugging information to be saved in the
code generated. With this option run time error messages indicate the
source code and its location, the backtraces are more precise, and
pp will display the source code of compiled procedures. The
debugging information is large (the size of the object file is typically
4 times bigger).
The `-o' option sets the name of the output file generated by the compiler. If a link file is being generated the name specified is that of the link file. Otherwise the name specified is that of the C file (this option is ignored if the compiler is generating more than one output file or is generating a dynamically loadable object file).
If the `-c' and `-dynamic' options do not appear on the command line, the Gambit linker is invoked to generate the link file from the set of C files specified on the command line or produced by the Gambit compiler. Unless the name is specified explicitly with the `-o' option, the link file is named `last_.c', where `last.c' is the last file in the set of C files. When the `-c' option is specified, the Scheme source files are compiled to C files. When the `-dynamic' option is specified, the Scheme source files are compiled to dynamically loadable object files (`.on' extension).
The `-flat' option is only meaningful if a link file is being generated (i.e. the `-c' and `-dynamic' options are absent). The `-flat' option directs the Gambit linker to generate a flat link file. By default, the linker generates an incremental link file (see the next section for a description of the two types of link files).
The `-l' option is only meaningful if an incremental link file is being generated (i.e. the `-c', `-dynamic' and `-flat' options are absent). The `-l' option specifies the link file (without the `.c' extension) of the base library to use for the incremental link. By default the link file of the Gambit runtime library is used (i.e. `~~/_gambc.c').
Gambit can be used to create applications and libraries of Scheme modules. This section explains the steps required to do so and the role played by the link files.
In general, an application is composed of a set of Scheme modules and C modules. Some of the modules are part of the Gambit runtime library and the other modules are supplied by the user. When the application is started it must setup various global tables (including the symbol table and the global variable table) and then sequentially execute the Scheme modules (more or less as if they were being loaded one after another). The information required for this is contained in one or more link files generated by the Gambit linker from the C files produced by the Gambit compiler.
The order of execution of the Scheme modules corresponds to the order of the modules on the command line which produced the link file. The order is usually important because most modules define variables and procedures which are used by other modules (for this reason the program's main computation is normally started by the last module).
When a single link file is used to contain the linking information of all the Scheme modules it is called a flat link file. Thus an application built with a flat link file contains in its link file both information on the user modules and on the runtime library. This is fine if the application is to be statically linked but is wasteful in a shared-library context because the linking information of the runtime library can't be shared and will be duplicated in all applications (this linking information typically takes 150 Kbytes).
Flat link files are mainly useful to bundle multiple Scheme modules to
make a runtime library (such as the Gambit runtime library) or to make a
single file that can be loaded with the load procedure.
An incremental link file contains only the linking information that is not already contained in a second link file (the "base" link file). Assuming that a flat link file was produced when the runtime library was linked, an application can be built by linking the user modules with the runtime library's link file, producing an incremental link file. This allows the creation of a shared-library which contains the modules of the runtime library and its flat link file. The application is dynamically linked with this shared-library and only contains the user modules and the incremental link file. For small applications this approach greatly reduces the size of the application because the incremental link file is small. A "hello world" program built this way can be as small as 5 Kbytes. Note that it is perfectly fine to use an incremental link file for statically linked programs (there is very little loss compared to a single flat link file).
Incremental link files may be built from other incremental link files. This allows the creation of shared-libraries which extend the functionality of the Gambit runtime library.
The simplest way to create an executable program is to call up
gsc to compile each Scheme module into a C file and create an
incremental link file. The C files and the link file must then be
compiled with a C compiler and linked (at the object file level) with
the Gambit runtime library and possibly other libraries (such as the
math library and the dynamic loading library). Here is for example how
a program with three modules (one in C and two in Scheme) can be built:
% uname -a
Linux bailey 1.2.13 #2 Wed Aug 28 16:29:41 GMT 1996 i586
% cat m1.c
int power_of_2 (int x) { return 1<<x; }
% cat m2.scm
(c-declare "extern int power_of_2 ();")
(define pow2 (c-lambda (int) int "power_of_2"))
(define (twice x) (cons x x))
% cat m3.scm
(write (map twice (map pow2 '(1 2 3 4)))) (newline)
% gsc -c m2.scm # create m2.c (note: .scm is optional)
% gsc -c m3.scm # create m3.c (note: .scm is optional)
% gsc m2.c m3.c # create the incremental link file m3_.c
% gcc m1.c m2.c m3.c m3_.c -lgambc
% a.out
((2 . 2) (4 . 4) (8 . 8) (16 . 16))
Alternatively, the three invocations of gsc can be replaced by a
single invocation:
% gsc m2 m3
To bundle multiple modules into a single file that can be dynamically
loaded with the load procedure, a flat link file is needed.
When compiling the C files and link file generated, the flag
`-D___DYNAMIC' must be passed to the C compiler. The three
modules of the previous example can be bundled in this way:
% uname -a
Linux bailey 1.2.13 #2 Wed Aug 28 16:29:41 GMT 1996 i586
% gsc -flat -o foo.c m2 m3
m2:
m3:
*** WARNING -- "cons" is not defined,
*** referenced in: ("m2.c")
*** WARNING -- "map" is not defined,
*** referenced in: ("m3.c")
*** WARNING -- "newline" is not defined,
*** referenced in: ("m3.c")
*** WARNING -- "write" is not defined,
*** referenced in: ("m3.c")
% gcc -shared -fPIC -D___DYNAMIC m1.c m2.c m3.c foo.c -o foo.o1
% gsi
Gambit Version 4.0 alpha 1
> (load "foo")
((2 . 2) (4 . 4) (8 . 8) (16 . 16))
"/users/feeley/foo.o1"
> ,q
The warnings indicate that there are no definitions (defines or
set!s) of the variables cons, map, newline
and write in the set of modules being linked. Before
`foo.o1' is loaded, these variables will have to be bound; either
implicitly (by the runtime library) or explicitly.
Here is a more complex example, under Solaris, which shows how to build a loadable library `mymod.o1' composed of the files `m1.scm', `m2.scm' and `x.c' that links to system shared libraries (for X-windows):
% uname -a
SunOS ungava 5.6 Generic_105181-05 sun4m sparc SUNW,SPARCstation-20
% gsc -flat -o mymod.c m1 m2
m1:
m2:
*** WARNING -- "*" is not defined,
*** referenced in: ("m1.c")
*** WARNING -- "+" is not defined,
*** referenced in: ("m2.c")
*** WARNING -- "display" is not defined,
*** referenced in: ("m2.c" "m1.c")
*** WARNING -- "newline" is not defined,
*** referenced in: ("m2.c" "m1.c")
*** WARNING -- "write" is not defined,
*** referenced in: ("m2.c")
% gcc -fPIC -c -I../lib -D___DYNAMIC mymod.c m1.c m2.c x.c
% /usr/ccs/bin/ld -G -o mymod.o1 mymod.o m1.o m2.o x.o -lX11 -lsocket
% gsi mymod.o1
hello from m1
hello from m2
(f1 10) = 22
% cat m1.scm
(define (f1 x) (* 2 (f2 x)))
(display "hello from m1")
(newline)
(c-declare "#include \"x.h\"")
(define x-initialize (c-lambda (char-string) bool "x_initialize"))
(define x-display-name (c-lambda () char-string "x_display_name"))
(define x-bell (c-lambda (int) void "x_bell"))
% cat m2.scm
(define (f2 x) (+ x 1))
(display "hello from m2")
(newline)
(display "(f1 10) = ")
(write (f1 10))
(newline)
(x-initialize (x-display-name))
(x-bell 50) ; sound the bell at 50%
% cat x.c
#include <X11/Xlib.h>
static Display *display;
int x_initialize (char *display_name)
{
display = XOpenDisplay (display_name);
return display != NULL;
}
char *x_display_name (void)
{
return XDisplayName (NULL);
}
void x_bell (int volume)
{
XBell (display, volume);
XFlush (display);
}
% cat x.h
int x_initialize (char *display_name);
char *x_display_name (void);
void x_bell (int);
A shared-library can be built using an incremental link file or a flat link file. An incremental link file is normally used when the Gambit runtime library (or some other library) is to be extended with new procedures. A flat link file is mainly useful when building a "primal" runtime library, which is a library (such as the Gambit runtime library) that does not extend another library. When compiling the C files and link file generated, the flags `-D___LIBRARY' and `-D___SHARED' must be passed to the C compiler. The flag `-D___PRIMAL' must also be passed to the C compiler when a primal library is being built.
A shared-library `mylib.so' containing the two first modules of the previous example can be built this way:
% uname -a Linux bailey 1.2.13 #2 Wed Aug 28 16:29:41 GMT 1996 i586 % gsc -o mylib.c m2 % gcc -shared -fPIC -D___LIBRARY -D___SHARED m1.c m2.c mylib.c -o mylib.so
Note that this shared-library is built using an incremental link file
(it extends the Gambit runtime library with the procedures pow2
and twice). This shared-library can in turn be used to build
an executable program from the third module of the previous example:
% gsc -l mylib m3 % gcc m3.c m3_.c mylib.so -lgambc % LD_LIBRARY_PATH=.:/usr/local/lib a.out ((2 . 2) (4 . 4) (8 . 8) (16 . 16))
The performance of the code can be increased by passing the `-D___SINGLE_HOST' flag to the C compiler. This will merge all the procedures of a module into a single C procedure, which reduces the cost of intra-module procedure calls. In addition the `-O' option can be passed to the C compiler. For large modules, it will not be practical to specify both `-O' and `-D___SINGLE_HOST' for typical C compilers because the compile time will be high and the C compiler might even fail to compile the program for lack of memory.
Some C compilers don't automatically search `/usr/local/include' for header files. In this case the flag `-I/usr/local/include' should be passed to the C compiler. Similarly, some C compilers/linkers don't automatically search `/usr/local/lib' for libraries. In this case the flag `-L/usr/local/lib' should be passed to the C compiler/linker.
A variety of flags are needed by some C compilers when compiling a shared-library or a dynamically loadable library. Some of these flags are: `-shared', `-call_shared', `-rdynamic', `-fpic', `-fPIC', `-Kpic', `-KPIC', `-pic', `+z'. Check your compiler's documentation to see which flag you need.
Under Digital UNIX, formerly DEC OSF/1, on DEC Alpha (a 64 bit processor) the Gambit runtime library is linked using the `-taso' C linker flag. This allows the use of 32 bit pointers instead of the usual 64 bit pointers, which roughly reduces the memory usage for data by a factor of two. The `-taso' flag must thus be passed to the C linker when linking a program. Gambit can be compiled to use 64 bit pointers by removing the definition `#define ___FORCE_32' from the file `gambit.h'. The `-taso' C linker flag can then be omitted.
Both gsi and gsc as well as executable programs compiled
and linked using gsc take a `-:' option which supplies
parameters to the runtime system. This option must appear first on
the command line. The colon is followed by a comma separated list of
options with no intervening spaces.
The available options are:
s
d
t
stdin, stdout and stderr as terminals.
u
stdin, stdout and stderr.
kstackcachesize
mheapsize
hheapsize
llivepercent
c
1
8
The `s' option selects standard Scheme mode. In this mode the reader is case insensitive and keywords are not recognized. By default the reader is case sensitive and recognizes keywords which end with a colon.
The `d' option selects debugging mode which displays a trace on standard error to monitor the activity of the runtime system.
The `t' option forces the standard input and output to be treated
like a terminal (i.e. as though isatty was true on stdin,
stdout and stderr). This is useful in situations, such as
running emacs under Windows-NT/95, where running the interpreter as a
subprocess invokes pipe mode. By using the `t' option in this
situation, the interpreter will enter interactive mode.
The `u' option forces all I/O on the standard input and output
(i.e. stdin, stdout and stderr) to be unbuffered.
This is useful to get prompt response when the program is run as a
subprocess (e.g. a pipe).
The `k' option specifies the size of the stack cache. The `k' is immediately followed by an integer indicating the number of kilobytes of memory. The stack cache is used to allocate continuation frames. When the stack cache overflows a GC is triggered and the continuation frames are transfered from the stack cache to the heap. This makes it possible for arbitrarily deep recursions to execute (up to a heap overflow). By default, the stack cache contains 4096 words. Increasing the size of the stack cache will normally improve the performance of programs with deep recursions.
The `m' option specifies the minimum size of the heap. The `m' is immediately followed by an integer indicating the number of kilobytes of memory. The heap will not shrink lower than this size. By default, the minimum size is 0.
The `h' option specifies the maximum size of the heap. The `h' is immediately followed by an integer indicating the number of kilobytes of memory. The heap will not grow larger than this size. By default, there is no limit (i.e. the heap will grow until the virtual memory is exhausted).
The `l' option specifies the percentage of the heap that will be occupied with live objects at the end of a garbage collection. The `l' is immediately followed by an integer between 1 and 100 inclusively indicating the desired percentage. The garbage collector will resize the heap to reach this percentage occupation. By default, the percentage is 50.
The `c' option selects the native character encoding as the default character encoding for I/O. This is used by default if no default encoding is specified.
The `1' option selects `LATIN-1' as the default character encoding for I/O.
The `8' option selects `UTF-8' (variable length Unicode) as the default character encoding for I/O.
Gambit uses a naming convention for files that is compatible with the one used by the underlying operating system but extended to allow referring to the home directory of the current user or some specific user and the Gambit installation directory.
A file is designated using a path. Each component of a path is separated by a `/' under UNIX, by a `/' or `\' under MSDOS and Windows-NT/95, and by a `:' under MACOS. A leading separator indicates an absolute path under UNIX, MSDOS and Windows-NT/95 but indicates a relative path under MACOS. A path which does not contain a path separator is relative to the current working directory on all operating systems (including MACOS). A drive specifier such as `C:' may prefix a file name under MSDOS and Windows-NT/95.
Under MACOS the folder `Gambit-C' must exist in the `Preferences' folder and contain the folder `gambc' (the Gambit installation directory). The `Gambit-C' and `gambc' folders must not be aliases.
In this document and the rest of this section in particular, `/' has been used to represent the path separator.
A path which starts with the characters `~/' designates a file in the user's home directory. The user's home directory is contained in the `HOME' environment variable under UNIX, MSDOS and Windows-NT/95. Under MACOS this designates the folder which contains the application.
A file name which starts with the characters `~user/' designates a file in the home directory of the given user. Under UNIX this is found using the password file. There is no equivalent under MSDOS, Windows-NT/95, and MACOS.
A file name which starts with the characters `~~/' designates a file in the Gambit installation directory. This directory is normally `/usr/local/share/gambc/' under UNIX, `C:\GAMBC\' under MSDOS and Windows-NT/95, and under MACOS the folder `gambc' in the `Gambit-C' folder. To override this binding under UNIX, MSDOS and Windows-NT/95, define the `GAMBCDIR' environment variable.
Gambit comes with the Emacs package `gambit.el' which provides a nice environment for running Gambit from within the Emacs editor. This package filters the standard output of the Gambit process and when it intercepts a location information (in the format `stream@line.column' where stream is either `(stdin)' if the expression was obtained from standard input or a string naming a file) it opens a window to highlight the corresponding expression.
To use this package, make sure the file `gambit.el' is accessible from your load-path and that the following lines are in your `.emacs' file:
(autoload 'gambit-inferior-mode "gambit" "Hook Gambit mode into cmuscheme.") (autoload 'gambit-mode "gambit" "Hook Gambit mode into scheme.") (add-hook 'inferior-scheme-mode-hook (function gambit-inferior-mode)) (add-hook 'scheme-mode-hook (function gambit-mode)) (setq scheme-program-name "gsi -:t")
Alternatively, if you don't mind always loading this package, you can simply add this line to your `.emacs' file:
(require 'gambit)
You can then start an inferior Gambit process by typing `M-x run-scheme'. The commands provided in `cmuscheme' mode will be available in the Gambit interaction buffer (i.e. `*scheme*') and in buffers attached to Scheme source files. Here is a list of the most useful commands (for a complete list type `C-h m' in the Gambit interaction buffer):
C-x C-e
C-c C-z
C-c C-l
(load file).
C-c C-k
(compile-file file).
The file `gambit.el' provides these additional commands:
C-c c
C-c s
C-c l
C-c [
C-c ]
C-c _
These commands can be shortened to `M-c', `M-s', `M-l', `M-[', `M-]', and `M-_' respectively by adding this line to your `.emacs' file:
(setq gambit-repl-command-prefix "\e")
This is more convenient to type than the two keystroke `C-c' based sequences but the purist may not like this because it does not follow normal Emacs conventions.
Here is what a typical `.emacs' file will look like:
(setq load-path
(cons "/usr/local/share/emacs/site-lisp" ; location of gambit.el
load-path))
(setq scheme-program-name "/tmp/gsi -:t") ; if gsi not in executable path
(setq gambit-highlight-color "gray") ; if you don't like the default
(setq gambit-repl-command-prefix "\e") ; if you want M-c, M-s, etc
(require 'gambit)
The Gambit Scheme system conforms to the R4RS and IEEE Scheme standards. Gambit supports a number of extensions to these standards by extending the behavior of standard special forms and procedures, and by adding special forms and procedures.
The extensions given in this section are all compatible with the Scheme standards. This means that the special forms and procedures behave as defined in the standards when they are used according to the standards.
These procedures take an optional argument which specifies the character encoding to use for I/O operations on the port. char-encoding must be one of the following symbols:
char
latin1
utf8
byte
ucs2
ucs4
If char-encoding is not specified, the default character encoding is used (see section Runtime options for all programs).
These procedures do nothing.
The read, write and display procedures take an
optional readtable argument which specifies the readtable to use.
If it is not specified, the readtable defaults to the current readtable.
These procedures support the following features.
#\newline
#\space
#\nul
#\bel
#\backspace
#\tab
#\linefeed
#\vt
#\page
#\return
#\rubout
#\n
#\#x20 is
the space character)
\n
\a
\b
\t
\v
\f
\r
\"
"
\\
\
\ooo
\xhh
#!" objects:
#!
#!eof
#!optional
#!rest
#!key
+inf.
-inf.
+nan.
-0.
These procedures take any number of arguments including no argument.
This is useful to test if the elements of a list are sorted in a
particular order. For example, testing that the list of numbers
lst is sorted in non-decreasing order can be done with the call
(apply < lst).
file must be a string naming an existing file containing Scheme
source code. The include special form splices the content of the
specified source file. This form can only appear where a define
form is acceptable.
For example:
(include "macros.scm") (define (f lst) (include "sort.scm") (map sqrt (sort lst)))
Define name as a macro special form which expands into body.
This form can only appear where a define form is acceptable.
Macros are lexically scoped. The scope of a local macro definition
extends from the definition to the end of the body of the surrounding
binding construct. Macros defined at the top level of a Scheme module
are only visible in that module. To have access to the macro
definitions contained in a file, that file must be included using the
include special form. Macros which are visible from the REPL are
also visible during the compilation of Scheme source files.
For example:
(define-macro (push val var) `(set! ,var (cons ,val ,var))) (define-macro (unless test . body) `(if ,test #f (begin ,@body)))
To examine the code into which a macro expands you can use the
compiler's `-expansion' option or the pp procedure.
For example:
> (define-macro (push val var) `(set! ,var (cons ,val ,var))) > (pp (lambda () (push 1 stack) (push 2 stack) (push 3 stack))) (lambda () (set! stack (cons 1 stack)) (set! stack (cons 2 stack)) (set! stack (cons 3 stack)))
This form introduces declarations to be used by the compiler
(currently the interpreter ignores the declarations). This form can
only appear where a define form is acceptable. Declarations
are lexically scoped in the same way as macros. The following
declarations are accepted by the compiler:
(dialect)
(strategy)
([not] inline)
(inlining-limit n)
define or lambda) and the call site must
be declared as (inline), and the compiler must be able to find
the definition of the procedure referred to at the call site (if the
procedure is bound to a global variable, the definition site must have a
(block) declaration). Note that inlining usually causes much
less code expansion than specified by the inlining limit (an expansion
around 10% is common for n=300).
([not] lambda-lift)
([not] standard-bindings var...)
([not] extended-bindings var...)
([not] safe)
char=? may disregard the type of its arguments in
`safe' as well as `not safe' mode.
([not] interrupts-enabled)
(number-type primitive...)
The default declarations used by the compiler are equivalent to:
(declare (ieee-scheme) (separate) (inline) (inlining-limit 300) (lambda-lift) (not standard-bindings) (not extended-bindings) (safe) (interrupts-enabled) (generic) )
These declarations are compatible with the semantics of Scheme.
Typically used declarations that enhance performance, at the cost of
violating the Scheme semantics, are: (standard-bindings),
(block), (not safe) and (fixnum).
( formal-argument-list ) |
r4rs-lambda-formals
#!optional optional-formal-argument* | empty
( variable initializer )
#!rest rest-formal-argument | empty
#!key keyword-formal-argument* | empty
( variable initializer )
( variable* ) |
( variable+ . variable ) |
variable
. variable
These forms are extended versions of the lambda and define
special forms of standard Scheme. They allow the use of optional and
keyword formal arguments with the syntax and semantics of the DSSSL
standard.
When the procedure introduced by a lambda (or define) is
applied to a list of actual arguments, the formal and actual arguments
are processed as specified in the R4RS if the lambda-formals (or
define-formals) is a r4rs-lambda-formals (or
r4rs-define-formals), otherwise they are processed as specified in
the DSSSL language standard:
#f. The initializer is
evaluated in an environment in which all previous formal arguments have
been bound.
#!key was specified in the formal-argument-list, there
shall be an even number of remaining actual arguments. These are
interpreted as a series of pairs, where the first member of each pair is
a keyword specifying the argument name, and the second is the
corresponding value. It shall be an error if the first member of a pair
is not a keyword. It shall be an error if the argument name is not the
same as a variable in a keyword-formal-argument, unless there is a
rest-formal-argument. If the same argument name occurs more than
once in the list of actual arguments, then the first value is used. If
there is no actual argument for a particular
keyword-formal-argument, then the variable is bound to the result
of evaluating initializer if one was specified, and otherwise to
#f. The initializer is evaluated in an environment in
which all previous formal arguments have been bound.
It shall be an error for a variable to appear more than once in a formal-argument-list.
It is unspecified whether variables receive their value by binding or by
assignment. Currently the compiler and interpreter use different
methods, which can lead to different semantics if
call-with-current-continuation is used in an initializer.
Note that this is irrelevant for DSSSL programs because
call-with-current-continuation does not exist in DSSSL.
For example:
> ((lambda (#!rest x) x) 1 2 3) (1 2 3) > (define (f a #!optional b) (list a b)) > (define (g a #!optional (b a) #!key (c (* a b))) (list a b c)) > (define (h a #!rest b #!key c) (list a b c)) > (f 1) (1 #f) > (f 1 2) (1 2) > (g 3) (3 3 9) > (g 3 4) (3 4 12) > (g 3 4 c: 5) (3 4 5) > (g 3 4 c: 5 c: 6) (3 4 5) > (h 7) (7 () #f) > (h 7 c: 8) (7 (c: 8) 8) > (h 7 c: 8 z: 9) (7 (c: 8 z: 9) 8)
These special forms are part of the "C-interface" which allows Scheme code to interact with C code. For a complete description of the C-interface see section Interface to C.
Record data types similar to Pascal records and C struct
types can be defined using the define-structure special form.
The identifier name specifies the name of the new data type. The
structure name is followed by k identifiers naming each field of
the record. The define-structure expands into a set of definitions
of the following procedures:
Record data types are printed out as
`#s(name (field value)...)',
where the field/value pair appears for each field and
value is the value contained in the corresponding field. Record
data types can not be read by the read procedure.
For example:
> (define-structure point x y color) > (define p (make-point 3 5 'red)) > p #s(point (x 3) (y 5) (color red)) > (point-x p) 3 > (point-color p) red > (point-color-set! p 'black) > p #s(point (x 3) (y 5) (color black))
trace starts tracing calls to the specified procedures. When a
traced procedure is called, a line containing the procedure and its
arguments is displayed (using the procedure call expression syntax).
The line is indented with a sequence of vertical bars which indicate the
nesting depth of the procedure's continuation. After the vertical bars
is a greater-than sign which indicates that the evaluation of the call
is starting.
When a traced procedure returns a result, it is displayed with the same indentation as the call but without the greater-than sign. This makes it easy to match calls and results (the result of a given call is the value at the same indentation as the greater-than sign). If a traced procedure P1 performs a tail call to a traced procedure P2, then P2 will use the same indentation as P1. This makes it easy to spot tail calls. The special handling for tail calls is needed to preserve the space complexity of the program (i.e. tail calls are implemented as required by Scheme even when they involve traced procedures).
untrace stops tracing calls to the specified procedures. With no
argument, trace returns the list of procedures currently being
traced. The void object is returned by trace if it is passed one
or more arguments. With no argument untrace stops all tracing
and returns the void object. A compiled procedure may be traced but
only if it is bound to a global variable.
For example:
> (define (fact n) (if (< n 2) 1 (* n (fact (- n 1))))) > (trace fact) > (fact 5) | > (fact 5) | | > (fact 4) | | | > (fact 3) | | | | > (fact 2) | | | | | > (fact 1) | | | | | 1 | | | | 2 | | | 6 | | 24 | 120 120 > (trace -) *** WARNING -- Rebinding global variable "-" to an interpreted procedure > (define (fact-iter n r) (if (< n 2) r (fact-iter (- n 1) (* n r)))) > (trace fact-iter) > (fact-iter 5 1) | > (fact-iter 5 1) | | > (- 5 1) | | 4 | > (fact-iter 4 5) | | > (- 4 1) | | 3 | > (fact-iter 3 20) | | > (- 3 1) | | 2 | > (fact-iter 2 60) | | > (- 2 1) | | 1 | > (fact-iter 1 120) | 120 120 > (trace) (#<procedure fact-iter> #<procedure -> #<procedure fact>) > (untrace) > (fact 5) 120
The procedure step enables single-stepping mode. After the call
to step the computation will stop just before the interpreter
executes the next evaluation step (as defined by
set-step-level!). A nested REPL is then started. Note that
because single-stepping is stopped by the REPL whenever the prompt is
displayed it is pointless to enter (step) by itself. On the
other hand entering (begin (step) expr) will evaluate
expr in single-stepping mode.
The procedure set-step-level! sets the stepping level which
determines the granularity of the evaluation steps when single-stepping
is enabled. The stepping level level must be an exact integer in
the range 0 to 7. At a level of 0, the interpreter ignores
single-stepping mode. At higher levels the interpreter stops the
computation just before it performs the following operations, depending
on the stepping level:
delay special form and operations at lower levels
lambda special form and operations at lower levels
define special form and operations at lower levels
set! special form and operations at lower levels
The default stepping level is 7.
For example:
> (define (fact n) (if (< n 2) 1 (* n (fact (- n 1))))) > (set-step-level! 1) > (begin (step) (fact 5)) *** STOPPED IN (stdin)@3.15 1> ,s | > (fact 5) *** STOPPED IN fact, (stdin)@1.22 1> ,s | | > (< n 2) | | #f *** STOPPED IN fact, (stdin)@1.43 1> ,s | | > (- n 1) | | 4 *** STOPPED IN fact, (stdin)@1.37 1> ,s | | > (fact (- n 1)) *** STOPPED IN fact, (stdin)@1.22 1> ,s | | | > (< n 2) | | | #f *** STOPPED IN fact, (stdin)@1.43 1> ,s | | | > (- n 1) | | | 3 *** STOPPED IN fact, (stdin)@1.37 1> ,l | | | > (fact (- n 1)) | | | 6 *** STOPPED IN fact, (stdin)@1.32 1> ,l | | > (* n (fact (- n 1))) | | 24 *** STOPPED IN fact, (stdin)@1.32 1> ,l | > (* n (fact (- n 1))) | 120 120
break places a breakpoint on each of the specified procedures.
When a procedure is called that has a breakpoint, the interpreter will
enable single-stepping mode (as if step had been called). This
typically causes the computation to stop soon inside the procedure if
the stepping level is high enough.
unbreak removes the breakpoints on the specified procedures.
With no argument, break returns the list of procedures currently
containing breakpoints. The void object is returned by break if
it is passed one or more arguments. With no argument unbreak
removes all the breakpoints and returns the void object. A breakpoint
can be placed on a compiled procedure but only if it is bound to a
global variable.
For example:
> (define (double x) (+ x x)) > (define (triple y) (- (double (double y)) y)) > (define (f z) (* (triple z) 10)) > (break double) > (break -) *** WARNING -- Rebinding global variable "-" to an interpreted procedure > (f 5) *** STOPPED IN double, (stdin)@1.21 1> ,b 0 double (stdin)@1:21 + 1 triple (stdin)@2:31 (double y) 2 f (stdin)@3:18 (triple z) 3 (interaction) (stdin)@6:1 (f 5) 4 ##initial-continuation 1> ,e x = 5 1> ,c *** STOPPED IN double, (stdin)@1.21 1> ,c *** STOPPED IN f, (stdin)@3.29 1> ,c 150 > (break) (#<procedure -> #<procedure double>) > (unbreak) > (f 5) 150
set-proper-tail-calls! sets a flag that controls how the
interpreter handles tail calls. When proper? is #f the
interpreter will treat tail calls like non-tail calls, that is a new
continuation will be created for the call. This setting is useful for
debugging, because when a primitive signals an error the location
information will point to the call site of the primitive even if this
primitive was called with a tail call. The default setting of this flag
is #t, which means that a tail call will reuse the continuation
of the calling function.
The setting of this flag only affects code that is subsequently
processed by load or eval, or entered at the REPL.
set-display-environment! sets a flag that controls the automatic
display of the environment by the REPL. If display? is true, the
environment is displayed by the REPL before the prompt. The default
setting is not to display the environment.
file must be a string. file-exists? returns #t if
a file by that name exists and can be opened for reading, and returns
#f otherwise.
flush-output causes all data buffered on the output port
port to be written out. If port is not specified, the
current output port is used.
pretty-print and pp are similar to write except
that the result is nicely formatted. If obj is a procedure
created by the interpreter or a procedure created by code compiled with
the `-debug' option, pp will display its source code. The
argument readtable specifies the readtable to use. If it is not
specified, the readtable defaults to the current readtable.
These procedures open a pipe for input or output, and return a port.
Command must be a string containing a shell command line. The
command line is passed to the underlying shell (/bin/sh on most
versions of UNIX) and the command's output (in the case of an input
pipe) or its input (in the case of an output pipe) are available
respectively for reading from the port and writing to the port.
The second argument, which is optional, specifies the character encoding
to use for I/O operations on the port (see open-input-file for
possible encodings).
Under MACOS these procedures always fail because there is no direct equivalent of pipes.
These procedures implement string ports. String ports can be used
like normal ports. open-input-string returns an input string
port which obtains characters from the given string instead of a file.
When the port is closed with a call to close-input-port, a
string containing the characters that were not read is returned.
open-output-string returns an output string port which
accumulates the characters written to it. When the port is closed
with a call to close-output-port, a string containing the
characters accumulated is returned.
For example:
> (let ((i (open-input-string "alice #(1 2)")))
(let* ((a (read i)) (b (read i)) (c (read i)))
(list a b c)))
(alice #(1 2) #!eof)
> (let ((o (open-output-string)))
(write "cloud" o)
(write (* 3 3) o)
(close-output-port o))
"\"cloud\"9"
The procedure call-with-input-string is similar to
call-with-input-file except that the characters are obtained from
the string string. The procedure call-with-output-string
calls the procedure proc with a freshly created string port and
returns a string containing all characters output to that port.
For example:
> (call-with-input-string
"(1 2)"
(lambda (p) (read-char p) (read p)))
1
> (call-with-output-string
(lambda (p) (write p p)))
"#<output-port (string)>"
The procedure with-input-from-string is similar to
with-input-from-file except that the characters are obtained from
the string string. The procedure with-output-to-string
calls the thunk and returns a string containing all characters output to
the current output port.
For example:
> (with-input-from-string
"(1 2) hello"
(lambda () (read) (read)))
hello
> (with-output-to-string
(lambda () (write car)))
"#<procedure car>"
These procedures are respectively similar to
with-input-from-file and with-output-to-file. The
difference is that the first argument is a port instead of a file name.
Returns the current readtable.
Readtables control the behavior of the reader (i.e. the read
procedure and the parser used by the load procedure and the
interpreter and compiler) and the printer (i.e. the procedures
write, display, pretty-print, and pp, and
the procedure used by the REPL to print results). Both the reader and
printer need to know the readtable so that they can preserve write/read
invariance. For example a symbol which contains upper case letters will
be printed with special escapes if the readtable indicates that the
reader is case insensitive.
These procedures configure readtables. The argument readtable specifies the readtable to configure. If it is not specified, the readtable defaults to the current readtable.
For the procedure set-case-conversion!, if conversion? is
#f, the reader will preserve the case of the symbols that are
read; if conversion? is the symbol upcase, the reader will
convert letters to upper case; otherwise the reader will convert to
lower case. The default is to preserve the case.
For the procedure set-keywords-allowed!, if allowed? is
#f, the reader will not recognize keyword objects; if
allowed? is the symbol prefix, the reader will recognize
keyword objects that start with a colon (as in Common Lisp); otherwise
the reader will recognize keyword objects that end with a colon (as in
DSSSL). The default is to recognize keyword objects that end in a
colon.
For example:
> (set-case-conversion! #f) > 'TeX TeX > (set-case-conversion! #t) > 'TeX tex > (set-keywords-allowed! #f) > (symbol? 'foo:) #t > (set-keywords-allowed! #t) > (keyword? 'foo:) ; quote not really needed #t > (set-keywords-allowed! 'prefix) > (keyword? ':foo) ; quote not really needed #t
These procedures implement the keyword data type. Keywords are
similar to symbols but are self evaluating and distinct from the
symbol data type. A keyword is an identifier immediately followed by
a colon (or preceded by a colon if (set-keywords-allowed! 'prefix)
was called). The procedure keyword? returns #t if
obj is a keyword, and otherwise returns #f. The
procedure keyword->string returns the name of keyword as
a string, excluding the colon. The procedure string->keyword
returns the keyword whose name is string (the name does not
include the colon).
For example:
> (keyword? 'color) #f > (keyword? color:) #t > (keyword->string color:) "color" > (string->keyword "color") color:
set-gc-report! controls the generation of reports during garbage
collections. If the argument is true, a brief report of memory usage is
generated after every garbage collection. It contains: the time taken
for this garbage collection, the amount of memory allocated in kilobytes
since the program was started, the size of the heap in kilobytes, the
heap memory in kilobytes occupied by live data, the proportion of the
heap occupied by live data, and the number of bytes occupied by movable
and non-movable objects.
These procedures implement the will data type. Will objects
provide support for finalization. A will is an object that contains a
reference to a testator object (the object attached to the will),
and an action procedure which is a nullary procedure. If no
action procedure is supplied when make-will is called, the will
has an action procedure that does nothing.
An object is finalizable if all paths to the object from the roots (i.e. current continuation and global variables) pass through a will object. Note that by this definition an object that is not reachable from the roots is finalizable. Some objects, including symbols, small integers (fixnums), booleans and characters, are considered to be always reachable and are therefore never finalizable.
When the runtime system detects that a will's testator is finalizable
the current computation is interrupted, the will's testator is set to
#f and the will's action procedure is called. Currently only
the garbage collector detects when objects become finalizable but this
may change in future versions of Gambit (for example the compiler
could perform an analysis to infer finalizability at compile time).
The garbage collector builds a list of all wills whose testators are
finalizable. Shortly after a garbage collection, the action
procedures of these wills will be called. The link from the will to
the action procedure is severed when the action procedure is called.
Note that the action procedure may be a closure which retains a reference to the will's testator object. In such a case or if the testator object is reachable from another will object, the testator object will not be reclaimed during the garbage collection that detected finalizability of the testator object. It is only when an object is not reachable from the roots (even through will objects) that it is reclaimed by the garbage collector.
A remarkable feature of wills is that an action procedure can "resurrect" an object after it has become finalizable (by making it non-finalizable). An action procedure could for example assign the testator object to a global variable.
For example:
> (define a (list 123))
> (set-cdr! a a) ; create a circular list
> (define b (vector a))
> (define c #f)
> (define w
(let ((obj a))
(make-will obj
(lambda ()
(display "executing action procedure")
(newline)
(set! c obj)))))
> (will? w)
#t
> (car (will-testator w))
123
> (##gc)
> (set! a #f)
> (##gc)
> (set! b #f)
> (##gc)
executing action procedure
> (will-testator w)
#f
> (car c)
123
gensym returns a new uninterned symbol. Uninterned symbols
are guaranteed to be distinct from the symbols generated by the
procedures read and string->symbol. The symbol
prefix is the prefix used to generate the new symbol's name. If
it is not specified, the prefix defaults to `g'.
For example:
> (gensym) g0 > (gensym) g1 > (eq? 'g2 (gensym)) #f > (gensym 'star-trek-) star-trek-3
void returns the void object. The read-eval-print loop prints
nothing when the result is the void object.
eval's first argument is a datum representing an expression.
eval evaluates this expression in the global interaction
environment and returns the result. If present, the second argument is
ignored (it is provided for compatibility with R5RS).
For example:
> (eval '(+ 1 2)) 3 > ((eval 'car) '(1 2)) 1 > (eval '(define x 5)) > x 5
file must be a string naming an existing file containing Scheme source code. The extension can be omitted from file if the Scheme file has a `.scm' extension. This procedure compiles the source file into a file containing C code. By default, this file is named after file with the extension replaced with `.c'. However, if output is supplied the file is named `output'.
Compilation options are given as a list of symbols after the file name. Any combination of the following options can be used: `verbose', `report', `expansion', `gvm', and `debug'.
Note that this procedure is only available in gsc.
The arguments of compile-file are the same as the first two
arguments of compile-file-to-c. The compile-file
procedure compiles the source file into an object file by first
generating a C file and then compiling it with the C compiler. The
object file is named after file with the extension replaced with
`.on', where n is a positive integer that acts as a
version number. The next available version number is generated
automatically by compile-file. Object files can be loaded
dynamically by using the load procedure. The `.on'
extension can be specified (to select a particular version) or omitted
(to load the highest numbered version). Versions which are no longer
needed must be deleted manually and the remaining version(s) must be
renamed to start with extension `.o1'.
Note that this procedure is only available in gsc and that it
is only useful on operating systems that support dynamic loading.
The first argument must be a non empty list of strings naming Scheme modules to link (extensions must be omitted). The remaining optional arguments must be strings. An incremental link file is generated for the modules specified in module-list. By default the link file generated is named `last_.c', where last is the name of the last module. However, if output is supplied the link file is named `output'. The base link file is specified by the base parameter. By default the base link file is the Gambit runtime library link file `~~/_gambc.c'. However, if base is supplied the base link file is named `base.c'.
Note that this procedure is only available in gsc.
The following example shows how to build the executable program `hello' which contains the two Scheme modules `m1.scm' and `m2.scm'.
% uname -a
Linux bailey 1.2.13 #2 Wed Aug 28 16:29:41 GMT 1996 i586
% cat m1.scm
(display "hello") (newline)
% cat m2.scm
(display "world") (newline)
% gsc
Gambit Version 4.0 alpha 1
> (compile-file-to-c "m1")
#t
> (compile-file-to-c "m2")
#t
> (link-incremental '("m1" "m2") "hello.c")
> ,q
% gcc m1.c m2.c hello.c -lgambc -o hello
% hello
hello
world
The first argument must be a non empty list of strings. The first string must be the name of a Scheme module or the name of a link file and the remaining strings must name Scheme modules (in all cases extensions must be omitted). The second argument must be a string, if it is supplied. A flat link file is generated for the modules specified in module-list. By default the link file generated is named `last_.c', where last is the name of the last module. However, if output is supplied the link file is named `output'.
Note that this procedure is only available in gsc.
The following example shows how to build the dynamically loadable Scheme library `lib.o1' which contains the two Scheme modules `m1.scm' and `m2.scm'.
% uname -a
Linux bailey 1.2.13 #2 Wed Aug 28 16:29:41 GMT 1996 i586
% cat m1.scm
(define (f x) (g (* x x)))
% cat m2.scm
(define (g y) (+ n y))
% gsc
Gambit Version 4.0 alpha 1
> (compile-file-to-c "m1")
#t
> (compile-file-to-c "m2")
#t
> (link-flat '("m1" "m2") "lib.c")
*** WARNING -- "*" is not defined,
*** referenced in: ("m1.c")
*** WARNING -- "+" is not defined,
*** referenced in: ("m2.c")
*** WARNING -- "n" is not defined,
*** referenced in: ("m2.c")
> ,q
% gcc -shared -fPIC -D___DYNAMIC m1.c m2.c lib.c -o lib.o1
% gsc
Gambit Version 4.0 alpha 1
> (load "lib")
*** WARNING -- Variable "n" used in module "m2" is undefined
"/users/feeley/lib.o1"
> (define n 10)
> (f 5)
35
> ,q
The warnings indicate that there are no definitions (defines or
set!s) of the variables *, + and n in the
modules contained in the library. Before the library is used, these
variables will have to be bound; either implicitly (by the runtime
library) or explicitly.
error signals an error and causes a nested REPL to be started.
The error message displayed is string followed by the remaining
arguments. The continuation of the REPL is the same as the one passed
to error. Thus, returning from the REPL with the `,c' or
`,(c expr)' command causes a return from the call to
error.
For example:
> (define (f x)
(let ((y (if (> x 0) (log x) (error "x must be positive"))))
(+ y 1)))
> (+ (f -4) 10)
*** ERROR IN (stdin)@2.34 -- x must be positive
1> ,(c 5)
16
exit causes the program to terminate with the status
status. If it is not specified, the status defaults to 0.
argv returns a list of strings corresponding to the command
line arguments, including the program file name as the first element
of the list. When the interpreter executes a Scheme script, the list
returned by argv contains the script's file name followed by
the remaining command line arguments.
getenv returns the value of the environment variable name
(a string) of the current process. A string is returned if the
environment variable is bound, otherwise #f is returned. Under
MACOS #f is always returned.
real-time returns the amount of time in nanoseconds elapsed since
the "epoch" (which is 00:00:00 Coordinated Universal Time 01-01-1970).
cpu-time returns a two element vector containing the cpu time
that has been used by the program since it was started. The first
element corresponds to "user" time in nanoseconds and the second
element corresponds to "system" time in nanoseconds.
runtime returns the cpu time in seconds that has been used by the
program since it was started (user time plus system time).
The resolution of the real time and cpu time clock is platform dependent. Typically the resolution of the cpu time clock is rather coarse (measured in "ticks" of 1/60th or 1/100th of a second). Time is computed internally using 64 bit integer arithmetic which means that there will be a wraparound after 584 years. Moreover, some operating systems report time in number of ticks using a 32 bit integer so the time returned by the above procedures may wraparound much before 584 years are over (for example 2.7 years if ticks are 1/50th of a second).
time evaluates expr and returns the result. As a side
effect it displays a message which indicates how long the evaluation
took (in real time and cpu time), how much time was spent in the garbage
collector, how much memory was allocated during the evaluation and how
many minor and major page faults occured (0 is reported if not running
under UNIX).
For example:
> (define (f x)
(let loop ((x x) (lst '()))
(if (= x 0)
lst
(loop (- x 1) (cons x lst)))))
> (length (time (f 100000)))
(time (f 100000))
1751 ms real time
1750 ms cpu time (1670 user, 80 system)
6 collections accounting for 200 ms cpu time (190 user, 10 system)
6400136 bytes allocated
1972 minor faults
no major faults
100000
This section contains additional special forms and procedures which are documented only in the interest of experimentation. They may be modified or removed in future releases of Gambit. The procedures in this section do not check the type of their arguments so they may cause the program to crash if called improperly.
The procedure ##gc forces a garbage collection of the heap.
Using the procedure ##add-gc-interrupt-job it is possible to
add a thunk that is called at the end of every garbage collection.
The procedure ##clear-gc-interrupt-jobs removes all the thunks
added with ##add-gc-interrupt-job.
The runtime system sets up a free running timer that raises an
interrupt at approximately 10 Hz. Using the procedure
##add-timer-interrupt-job it is possible to add a thunk that is
called every time a timer interrupt is received. The procedure
##clear-timer-interrupt-jobs removes all the thunks added with
##add-timer-interrupt-job. It is relatively easy to implement
threads by using these procedures in conjunction with
call-with-current-continuation.
The procedure ##shell-command calls up the shell to execute
command which must be a string. ##shell-command returns
the exit status of the shell in the form that the C system
command returns.
These procedures manipulate file paths. ##path-expand takes the
path of a file or directory and returns an absolute or relative path of
the file or directory, depending on the value of format. An
absolute path is returned if format is the symbol absolute;
a path relative to the current working directory is returned if
format is the symbol relative; the shorter of the two paths
is returned if format is the symbol shortest (ties break
toward absolute path). The expanded path of a directory will always end
with a path separator (i.e. `/', `\', or `:' depending on
the operating system). If the path is the empty string, the current
working directory is returned. #f is returned if the path is
invalid.
The procedure ##path-absolute? tests if the given path is
absolute.
The remaining procedures extract various parts of a path.
##path-extension returns the file extension (including the
period) or the empty string if there is no extension.
##path-strip-extension returns the path with the extension
stripped off. ##path-directory returns the file's directory
(including the last path separator) or the empty string if no directory
is specified in the path. ##path-strip-directory returns the
path with the directory stripped off.
These special forms provide support for "dynamic variables" which
have dynamic scope. Dynamic variables and normal (lexically scoped)
variables are in different namespaces so there is no possible naming
conflict between them. In all these special forms var is an
identifier which names the dynamic variable. dynamic-define
defines the global dynamic variable var (if it doesn't already
exist) and assigns to it the value of val. dynamic-let
has a syntax similar to let. It creates bindings of the given
dynamic variables which are accessible for the duration of the
evaluation of body. dynamic-ref returns the value
currently bound to the dynamic variable var.
dynamic-set! assigns the value of val to the dynamic
variable var. The dynamic environment that was in effect when a
continuation was created by call-with-current-continuation is
restored when that continuation is invoked.
For example:
> (dynamic-define radix 10)
> (define (f x) (number->string x (dynamic-ref radix)))
> (list (f 5) (f 15))
("5" "15")
> (dynamic-let ((radix 2))
(list (f 5) (f 15)))
("101" "1111")
Bytevectors are uniform vectors containing raw numbers (signed or unsigned exact integers or inexact reals). There are 10 types of bytevectors: `s8vector' (vector of exact integers in the range -2^7 to 2^7-1), `u8vector' (vector of exact integers in the range 0 to 2^8-1), `s16vector' (vector of exact integers in the range -2^15 to 2^15-1), `u16vector' (vector of exact integers in the range 0 to 2^16-1), `s32vector' (vector of exact integers in the range -2^31 to 2^31-1), `u32vector' (vector of exact integers in the range 0 to 2^32-1), `s64vector' (vector of exact integers in the range -2^63 to 2^63-1), `u64vector' (vector of exact integers in the range 0 to 2^64-1), `f32vector' (vector of 32 bit floating point numbers), and `f64vector' (vector of 64 bit floating point numbers). These procedures are the analog of the normal vector procedures for each of the bytevector types.
For example:
> (define v (u8vector 10 255 13)) > (u8vector-set! v 2 99) > v #u8(10 255 99) > (u8vector-ref v 1) 255 > (u8vector->list v) (10 255 99)
Gambit supports the Unicode character encoding standard
(ISO/IEC-10646-1). Scheme characters can be any of the characters in
the 16 bit subset of Unicode known as UCS-2. Scheme strings can
contain any character in UCS-2. Source code can also contain any
character in UCS-2. However, to read such source code properly
gsi and gsc must be told which character encoding to use
for reading the source code (i.e. UTF-8, UCS-2, or UCS-4). This can
be done by passing a character encoding parameter to load or by
specifying the runtime option `-:8' when gsi and
gsc are started.
The Gambit Scheme system offers a mechanism for interfacing Scheme code and C code called the "C-interface". A Scheme program indicates which C functions it needs to have access to and which Scheme procedures can be called from C, and the C interface automatically constructs the corresponding Scheme procedures and C functions. The conversions needed to transform data from the Scheme representation to the C representation (and back), are generated automatically in accordance with the argument and result types of the C function or Scheme procedure.
The C-interface places some restrictions on the types of data that can be exchanged between C and Scheme. The mapping of data types between C and Scheme is discussed in the next section. The remaining sections of this chapter describe each special form of the C-interface.
Scheme and C do not provide the same set of built-in data types so it is important to understand which Scheme type is compatible with which C type and how values get mapped from one environment to the other. For the sake of explaining the mapping, we assume that Scheme and C have been augmented with some new data types. To Scheme is added the data type `C-pointer' to support the C concept of pointer. The following data types are added to C:
scheme-object
___SCMOBJ defined in `gambit.h')
bool
___BOOL defined in `gambit.h')
int8
___S8 defined in `gambit.h')
unsigned-int8
___U8 defined in `gambit.h')
int16
___S16 defined in `gambit.h')
unsigned-int16
___U16 defined in `gambit.h')
int32
___S32 defined in `gambit.h')
unsigned-int32
___U32 defined in `gambit.h')
int64
___S64 defined in `gambit.h')
unsigned-int64
___U64 defined in `gambit.h')
float32
___F32 defined in `gambit.h')
float64
___F64 defined in `gambit.h')
latin1
___LATIN1 defined in `gambit.h')
ucs2
___UCS2 defined in `gambit.h')
ucs4
___UCS4 defined in `gambit.h')
char-string
latin1-string
___LATIN1*)
utf8-string
char, i.e. char*)
ucs2-string
___UCS2*)
ucs4-string
___UCS4*)
To specify a particular C type inside the c-lambda,
c-define and c-define-type forms, the following "Scheme
notation" is used:
Scheme notation
void
void
bool
bool
char
char (may be signed or unsigned depending on the C compiler)
signed-char
signed char
unsigned-char
unsigned char
latin1
latin1
ucs2
ucs2
ucs4
ucs4
short
short
unsigned-short
unsigned short
int
int
unsigned-int
unsigned int
long
long
unsigned-long
unsigned long
float
float
double
double
int8
int8
unsigned-int8
unsigned-int8
int16
int16
unsigned-int16
unsigned-int16
int32
int32
unsigned-int32
unsigned-int32
int64
int64
unsigned-int64
unsigned-int64
float32
float32
float64
float64
(struct "name")
struct name
(union "name")
union name
(pointer type [tag [release-fn]])
T* (where T is the C equivalent of type
which must be the Scheme notation of a C type; see below for the meaning
of tag and release-fn)
(nonnull-pointer type [tag [release-fn]])
(pointer type [tag [release-fn]])
except the NULL pointer is not allowed
(function (type1...) result-type)
char-string
char-string
latin1-string
latin1-string
utf8-string
utf8-string
ucs2-string
ucs2-string
ucs4-string
ucs4-string
scheme-object
scheme-object
name
c-define-type)
"c-type-id"
"FILE" and "time_t")
Note that not all of these types can be used in all contexts. In
particular the arguments and result of functions defined with
c-lambda and c-define can not be (struct
"name") or (union "name") or
"c-type-id". On the other hand, pointers to these types
are acceptable.
The pointer and nonnull-pointer types allow a tag
and release-fn to be specified. If not specified they default to
#f. The tag indicates the "type" to which the pointer
belongs and is used for type checking (it must be a symbol or
#f). A pointer type P1 is a subtype of type P2 (i.e. a pointer
of type P1 is allowed where a pointer type P2 is expected) if P2's
tag is #f, or if both tags are the same. The
release-fn indicates which function to call when the C-pointer
object is reclaimed by the garbage collector (because it is no longer
reachable by the program) or when the release-pointer procedure
is called (which nullifies the pointer as a side-effect). If
release-fn is #f then no action is performed. Otherwise,
release-fn must be a string naming a C function whose single
parameter is of type void* and whose result is of type
___SCMOBJ. The parameter is the pointer to release and the result
is ignored. Note that release-fn is called at most once. The
release-fn is useful to reclaim storage or decrement reference
counts associated with the pointer.
The following table gives the C types to which each Scheme type can be converted:
#f
scheme-object; bool; any string, pointer or function type
#t
scheme-object; bool
scheme-object; bool;
[[un]signed] char; latin1; ucs2;
ucs4
scheme-object; bool; [unsigned]
short/int/long; [unsigned-]
int8/int16/int32/int64
scheme-object; bool; float; double; float32; float64
scheme-object; bool; any string type
scheme-object; bool; any pointer type
scheme-object; bool
scheme-object; bool
scheme-object; bool; any function type
scheme-object; bool
The following table gives the Scheme types to which each C type will be converted:
C type
scheme-object
bool
character types
integer types
float/double/float32/float64
string types
#f if it is equal to `NULL'
pointer types
#f if it is equal to `NULL'
function types
#f if it is equal to `NULL'
void
All Scheme types are compatible with the C types scheme-object
and bool. Conversion to and from the C type
scheme-object is the identity function on the object encoding.
This provides a low-level mechanism for accessing Scheme's object
representation from C (with the help of the macros in the
`gambit.h' header file). When a C bool type is expected,
an extended Scheme boolean can be passed (#f is converted to 0
and all other values are converted to 1).
The Scheme boolean #f can be passed to the C environment where
any C string type, C pointer type, or C function type is expected. In
this case, #f is converted to the `NULL' pointer. C
bools are extended booleans so any value different from 0
represents true. Thus, a C bool passed to the Scheme
environment is mapped as follows: 0 to #f and all other values to
#t.
A Scheme character passed to the C environment where any C character type is expected is converted to the corresponding character in the C environment. An error is signaled if the Scheme character does not fit in the C character. Any C character type passed to Scheme is converted to the corresponding Scheme character. An error is signaled if the C character does not fit in the Scheme character.
A Scheme exact integer passed to the C environment where a C integer
type (other than char) is expected is converted to the
corresponding integral value. An error is signaled if the value falls
outside of the range representable by that integral type. C integer
values passed to the Scheme environment are mapped to the same Scheme
exact integer. If the value is outside the fixnum range, a bignum is
created.
A Scheme inexact real passed to the C environment is converted to the
corresponding float, double, float32 or
float64 value. C float, double, float32 and
float64 values passed to the Scheme environment are mapped to the
closest Scheme inexact real.
Scheme's rational numbers and complex numbers are not compatible with any C numeric type.
A Scheme string passed to the C environment where any C string type is expected is converted to a null terminated string using the appropriate encoding. The C string is a fresh copy of the Scheme string. Any C string type passed to the Scheme environment causes the creation of a fresh Scheme string containing a copy of the C string.
A C pointer passed to the Scheme environment causes the creation and
initialization of a new `C-pointer' object. This object is simply
a cell containing the pointer to a memory location in the C environment.
The pointer is ignored by the garbage collector. As a special case, the
`NULL' C pointer is converted to #f. A Scheme
`C-pointer' and #f can be passed to the C environment where
a C pointer is expected. The conversion simply recreates the original C
pointer or `NULL' pointer. When a nonnull-pointer is
specified, the conversion to and from the `NULL' pointer is not
allowed.
Only Scheme procedures defined with the c-define special form and
#f can be passed where a C function is expected. Conversion from
C functions to Scheme procedures is not currently implemented.
c-declare special formSynopsis:
(c-declare c-declaration)
Initially, the C file produced by gsc contains only an
`#include' of `gambit.h'. This header file provides a
number of macro and procedure declarations to access the Scheme object
representation. The special form c-declare adds
c-declaration (which must be a string containing the C
declarations) to the C file. This string is copied to the C file on a
new line so it can start with preprocessor directives. All types of C
declarations are allowed (including type declarations, variable
declarations, function declarations, `#include' directives,
`#define's, and so on). These declarations are visible to
subsequent c-declares, c-initializes, and
c-lambdas, and c-defines in the same module. The most
common use of this special form is to declare the external functions
that are referenced in c-lambda special forms. Such functions
must either be declared explicitly or by including a header file which
contains the appropriate C declarations.
The c-declare special form does not return a value.
It can only appear at top level.
For example:
(c-declare " #include <stdio.h> extern char *getlogin (); #ifdef sparc char *host = \"sparc\"; /* note backslashes */ #else char *host = \"unknown\"; #endif FILE *tfile; ")
c-initialize special formSynopsis:
(c-initialize c-code)
Just after the program is loaded and before control is passed to the
Scheme code, each C file is initialized by calling its associated
initialization function. The body of this function is normally empty
but it can be extended by using the c-initialize form. Each
occurence of the c-initialize form adds code to the body of the
initialization function in the order of appearance in the source file.
c-code must be a string containing the C code to execute. This
string is copied to the C file on a new line so it can start with
preprocessor directives.
The c-initialize special form does not return a value.
It can only appear at top level.
For example:
(c-initialize "tfile = tmpfile ();")
c-lambda special formSynopsis:
(c-lambda (type1...) result-type c-name-or-code)
The c-lambda special form makes it possible to create a Scheme
procedure that will act as a representative of some C function or C
code sequence. The first subform is a list containing the type of
each argument. The type of the function's result is given next.
Finally, the last subform is a string that either contains the name of
the C function to call or some sequence of C code to execute.
Variadic C functions are not supported. The resulting Scheme procedure
takes exactly the number of arguments specified and delivers them in
the same order to the C function. When the Scheme procedure is
called, the arguments will be converted to their C representation and
then the C function will be called. The result returned by the C
function will be converted to its Scheme representation and this value
will be returned from the Scheme procedure call. An error will be
signaled if some conversion is not possible.
When c-name-or-code is not a valid C identifier, it is treated as
an arbitrary piece of C code. Within the C code the variables
`___arg1', `___arg2', etc. can be referenced to access the
converted arguments. Similarly, the result to be returned from the call
should be assigned to the variable `___result'. If no result needs
to be returned, the result-type should be void and no
assignment to the variable `___result' should take place. Note
that the C code should not contain return statements as this is
meaningless. Control must always fall off the end of the C code. The C
code is copied to the C file on a new line so it can start with
preprocessor directives. Moreover the C code is always placed at the
head of a compound statement whose lifetime encloses the C to Scheme
conversion of the result. Consequently, temporary storage (strings in
particular) declared at the head of the C code can be returned by
assigning them to `___result'. In the c-name-or-code, the
macro `___AT_END' may be defined as the piece of C code to execute
before control is returned to Scheme but after the `___result' is
converted to its Scheme representation. This is mainly useful to
deallocate temporary storage contained in `___result'.
When passed to the Scheme environment, the C void type is
converted to the void object.
For example:
(define fopen
(c-lambda (char-string char-string) (pointer "FILE") "fopen"))
(define fgetc
(c-lambda ((pointer "FILE")) int "fgetc"))
(let ((f (fopen "datafile" "r")))
(if f (write (fgetc f))))
(define char-code (c-lambda (char) int "___result = ___arg1;"))
(define host ((c-lambda () char-string "___result = host;")))
(define stdin ((c-lambda () (pointer "FILE") "___result = stdin;")))
((c-lambda () void
"printf( \"hello\\n\" ); printf( \"world\\n\" );"))
(define pack-1-char (c-lambda (char) char-string
"
___result = malloc (2);
if (___result != NULL) { ___result[0] = ___arg1; ___result[1] = 0; }
#define ___AT_END if (___result != NULL) free (___result);
"))
(define pack-2-chars (c-lambda (char char) char-string
"
char s[3]; s[0] = ___arg1; s[1] = ___arg2; s[2] = 0; ___result = s;
"))
c-define special formSynopsis:
(c-define (variable define-formals) (type1...) result-type c-name scope body)
The c-define special form makes it possible to create a C
function that will act as a representative of some Scheme procedure. A
C function named c-name as well as a Scheme procedure bound to the
variable variable are defined. The parameters of the Scheme
procedure are define-formals and its body is at the end of the
form. The type of each argument of the C function, its result type and
c-name (which must be a string) are specified after the parameter
specification of the Scheme procedure. When the C function c-name
is called from C, its arguments are converted to their Scheme
representation and passed to the Scheme procedure. The result of the
Scheme procedure is then converted to its C representation and the C
function c-name returns it to its caller.
The scope of the C function can be changed with the scope
parameter, which must be a string. This string is placed immediately
before the declaration of the C function. So if scope is the
string "static", the scope of c-name is local to the module
it is in, whereas if scope is the empty string, c-name is
visible from other modules.
The c-define special form does not return a value.
It can only appear at top level.
For example:
(c-define (proc x #!optional (y x) #!rest z) (int int char float) int "f" "" (write (cons x (cons y z))) (newline) (+ x y)) (proc 1 2 #\x 1.5) => 3 and prints (1 2 #\x 1.5) (proc 1) => 2 and prints (1 1) ; if f is called from C with the call f (1, 2, 'x', 1.5) ; the value 3 is returned and (1 2 #\x 1.5) is printed. ; f has to be called with 4 arguments.
The c-define special form is particularly useful when the
driving part of an application is written in C and Scheme procedures
are called directly from C. The Scheme part of the application is in
a sense a "server" that is providing services to the C part. The
Scheme procedures that are to be called from C need to be defined
using the c-define special form. Before it can be used, the
Scheme part must be initialized with a call to the function
`___setup'. Before the program terminates, it must call the
function `___cleanup' so that the Scheme part may do final
cleanup. A sample application is given in the file
`tests/server.scm'.
c-define-type special formSynopsis:
(c-define-type name type [c-to-scheme scheme-to-c cleanup])
This form associates the type identifier name to the C type
type. The name must not clash with predefined types
(e.g. char-string, latin1, etc.) or with types previously
defined with c-define-type in the same file. The
c-define-type special form does not return a value. It can only
appear at top level.
If only the two parameters name and type are supplied then after this definition, the use of name in a type specification is synonymous to type.
For example:
(c-define-type FILE "FILE") (c-define-type FILE* (pointer FILE)) (c-define-type time-struct-ptr (pointer (struct "tms"))) (define fopen (c-lambda (char-string char-string) FILE* "fopen")) (define fgetc (c-lambda (FILE*) int "fgetc"))
Note that identifiers are not case sensitive in standard Scheme but it is good programming practice to use a name with the same case as in C.
If five parameters are supplied, then type must be a string naming
the C type, c-to-scheme and scheme-to-c must be strings
suffixing the C macros that convert data of that type between C and
Scheme, and cleanup must be a boolean indicating whether it is
necessary to perform a cleanup operation (such as freeing memory) when
data of that type is converted from Scheme to C. Two pairs of C macros
need to be defined for conversions performed by c-lambda forms
and two pairs for conversions performed by c-define forms:
___BEGIN_CLAM_scheme-to-c(___SCMOBJ, type, int) ___END_CLAM_scheme-to-c(___SCMOBJ, type, int) ___BEGIN_CLAM_c-to-scheme(type, ___SCMOBJ) ___END_CLAM_c-to-scheme(type, ___SCMOBJ) ___BEGIN_CDEF_c-to-scheme(type, ___SCMOBJ, int) ___END_CDEF_c-to-scheme(type, ___SCMOBJ, int) ___BEGIN_CDEF_scheme-to-c(___SCMOBJ, type) ___END_CDEF_scheme-to-c(___SCMOBJ, type)
The macros prefixed with ___BEGIN perform the conversion and
those prefixed with ___END perform any cleanup necessary (such as
freeing memory allocated during conversion). The first parameter of
these macros is the C variable that contains the value to be converted,
and the second parameter is the C variable in which to store the
converted value. The third parameter, when present, is the index
(starting at 1) of the parameter of the c-lambda or
c-define form that is being converted (this is useful for
reporting precise error information when a conversion is impossible).
To allow for type checking, the first three ___BEGIN macros must
expand to an unterminated compound statement prefixed by an if,
conditional on the absence of type check error:
if ((___err = conversion_operation) == ___NO_ERR) {
The last ___BEGIN macro must expand to an unterminated compound
statement:
{ ___err = conversion_operation;
If type check errors are impossible then a ___BEGIN macro can
simply expand to an unterminated compound statement performing the
conversion:
{ conversion_operation;
The ___END macros must expand to a statement, or to nothing if no
cleanup is required, followed by a closing brace (to terminate the
compound statement started at the corresponding ___BEGIN macro).
The conversion_operation is typically a function call that returns
a value of type ___ERR_CODE (the error codes are defined in
`gambit.h', and the error code ___UNKNOWN_ERR is available
for generic errors). conversion_operation can also set the
variable ___errmsg of type ___SCMOBJ to a specific Scheme
string error message.
Below is a simple example showing how to interface to an `EBCDIC' character type. Memory allocation is not needed for conversion and type check errors are impossible when converting EBCDIC to Scheme characters, but they are possible when converting from Scheme characters to EBCDIC since Gambit supports Unicode characters.
(c-declare
"
typedef char EBCDIC; /* EBCDIC encoded characters */
void put_char (EBCDIC c) { ... } /* EBCDIC I/O functions */
EBCDIC get_char (void) { ... }
char EBCDIC_to_latin1[256] = { ... }; /* conversion tables */
char latin1_to_EBCDIC[256] = { ... };
___ERR_CODE scmobj_to_EBCDIC (___SCMOBJ src, EBCDIC *dst)
{
int x = ___INT(src); /* convert from Scheme character to int */
if (x > 255) return ___UNKNOWN_ERR;
*dst = latin1_to_EBCDIC[x];
return ___NO_ERR;
}
#define ___BEGIN_CLAM_scmobj_to_EBCDIC(src,dst,i) \\
if ((___err = scmobj_to_EBCDIC (src, &dst)) == ___NO_ERR) {
#define ___END_CLAM_scmobj_to_EBCDIC(src,dst,i) }
#define ___BEGIN_CLAM_EBCDIC_to_scmobj(src,dst) \\
{ dst = ___CHR(EBCDIC_to_latin1[src]);
#define ___END_CLAM_EBCDIC_to_scmobj(src,dst) }
#define ___BEGIN_CDEF_EBCDIC_to_scmobj(src,dst,i) \\
{ dst = ___CHR(EBCDIC_to_latin1[src]);
#define ___END_CDEF_EBCDIC_to_scmobj(src,dst,i) }
#define ___BEGIN_CDEF_scmobj_to_EBCDIC(src,dst) \\
{ ___err = scmobj_to_EBCDIC (src, &dst);
#define ___END_CDEF_scmobj_to_EBCDIC(src,dst) }
")
(c-define-type EBCDIC "EBCDIC" "EBCDIC_to_scmobj" "scmobj_to_EBCDIC" #f)
(define put-char (c-lambda (EBCDIC) void "put_char"))
(define get-char (c-lambda () EBCDIC "get_char"))
(c-define (write-EBCDIC c) (EBCDIC) void "write_EBCDIC" ""
(write-char c))
(c-define (read-EBCDIC) () EBCDIC "read_EBCDIC" ""
(read-char))
Below is a more complex example that requires memory allocation when
converting from C to Scheme. It is an interface to a 2D `point'
type which is represented in Scheme by a pair of integers. The
conversion of the x and y components is done by calls to
the conversion macros for the int type (defined in
`gambit.h'). Note that no cleanup is necessary when converting
from Scheme to C (i.e. the last parameter of the c-define-type is
#f).
(c-declare
"
typedef struct { int x, y; } point;
void line_to (point p) { ... }
point get_mouse (void) { ... }
point add_points (point p1, point p2) { ... }
___ERR_CODE scmobj_to_point (___SCMOBJ src, point *dst, int arg_num)
{
___ERR_CODE ___err = ___NO_ERR;
if (!___PAIRP(src))
___err = ___UNKNOWN_ERR;
else
{
___SCMOBJ car = ___CAR(src);
___SCMOBJ cdr = ___CDR(src);
___BEGIN_CLAM_SCMOBJ_TO_INT(car,dst->x,arg_num)
___BEGIN_CLAM_SCMOBJ_TO_INT(cdr,dst->y,arg_num)
___END_CLAM_SCMOBJ_TO_INT(cdr,dst->y,arg_num)
___END_CLAM_SCMOBJ_TO_INT(car,dst->x,arg_num)
}
return ___err;
}
___ERR_CODE point_to_scmobj (point src, ___SCMOBJ *dst, int arg_num)
{
___ERR_CODE ___err = ___NO_ERR;
___SCMOBJ x_scmobj;
___SCMOBJ y_scmobj;
___BEGIN_CDEF_INT_TO_SCMOBJ(src.x,x_scmobj,arg_num)
___BEGIN_CDEF_INT_TO_SCMOBJ(src.y,y_scmobj,arg_num)
*dst = ___EXT(___make_pair) (x_scmobj, y_scmobj, ___STILL);
if (*dst == ___FAL)
___err = ___UNKNOWN_ERR; /* heap overflow */
___END_CDEF_INT_TO_SCMOBJ(src.y,y_scmobj,arg_num)
___END_CDEF_INT_TO_SCMOBJ(src.x,x_scmobj,arg_num)
return ___err;
}
#define ___BEGIN_CLAM_scmobj_to_point(src,dst,i) \\
if ((___err = scmobj_to_point (src, &dst, i)) == ___NO_ERR) {
#define ___END_CLAM_scmobj_to_point(src,dst,i) }
#define ___BEGIN_CLAM_point_to_scmobj(src,dst) \\
if ((___err = point_to_scmobj (src, &dst, ___RETURN_POS)) == ___NO_ERR) {
#define ___END_CLAM_point_to_scmobj(src,dst) \\
___EXT(___release_scmobj) (dst); }
#define ___BEGIN_CDEF_point_to_scmobj(src,dst,i) \\
if ((___err = point_to_scmobj (src, &dst, i)) == ___NO_ERR) {
#define ___END_CDEF_point_to_scmobj(src,dst,i) \\
___EXT(___release_scmobj) (dst); }
#define ___BEGIN_CDEF_scmobj_to_point(src,dst) \\
{ ___err = scmobj_to_point (src, &dst, ___RETURN_POS);
#define ___END_CDEF_scmobj_to_point(src,dst) }
")
(c-define-type point "point" "point_to_scmobj" "scmobj_to_point" #f)
(define line-to (c-lambda (point) void "line_to"))
(define get-mouse (c-lambda () point "get_mouse"))
(define add-points (c-lambda (point point) point "add_points"))
(c-define (write-point p) (point) void "write_point" ""
(write p))
(c-define (read-point) () point "read_point" ""
(read))
The C-interface allows C to Scheme calls to be nested. This means that during a call from C to Scheme another call from C to Scheme can be performed. This case occurs in the following program:
(c-declare
"
int p (char *); /* forward declarations */
int q (void);
int a (char *x) { return 2 * p (x+1); }
int b (short y) { return y + q (); }
")
(define a (c-lambda (char-string) int "a"))
(define b (c-lambda (short) int "b"))
(c-define (p z) (char-string) int "p" ""
(+ (b 10) (string-length z)))
(c-define (q) () int "q" ""
123)
(write (a "hello"))
In this example, the main Scheme program calls the C function `a' which calls the Scheme procedure `p' which in turn calls the C function `b' which finally calls the Scheme procedure `q'.
Gambit-C maintains the Scheme continuation separately from the C stack, thus allowing the Scheme continuation to be unwound independently from the C stack. The C stack frame created for the C function `f' is only removed from the C stack when control returns from `f' or when control returns to a C function "above" `f'. Special care is required for programs which escape to Scheme (using first-class continuations) from a Scheme to C (to Scheme) call because the C stack frame will remain on the stack. The C stack may overflow if this happens in a loop with no intervening return to a C function. To avoid this problem make sure the C stack gets cleaned up by executing a normal return from a Scheme to C call.
define) of the same procedure. Replace all
but the first define with assignments (set!).
define-structure) can be written with
write but can not be read by read.
floor and ceiling procedures gave incorrect
results for negative arguments.
round procedure did not obey the round to even rule.
A value exactly in between two consecutive integers is now correctly
rounded to the closest even integer.
apply did not check that an implementation limit
on the number of arguments was not exceeded. This could corrupt the
heap if too many arguments were passed to apply.
and and or special forms was
very slow for deep nestings. This is now much faster. Note that
the code generated has not changed.
equal? was not performed properly when the arguments
were procedures. This could cause the program to crash.
display or write will be read back
by read as the same number.
display, write and number->string
are more precise and much faster than before (up to a factor of 50).
exact->inexact convert
exact rationals much more precisely than before, in particular when
the denominator is more than 1e308.
The Gambit system (including the Gambit-C version) is Copyright (C) 1994-2000 by Marc Feeley, all rights reserved.
The Gambit system and programs developed with it may be distributed
only under the following conditions: they must not be sold or
transferred for compensation and they must include this copyright and
distribution notice. For a commercial license please contact
gambit@iro.umontreal.ca.
Jump to: # - < - = - > - ^ - _ - a - b - c - d - e - f - g - h - i - k - l - m - n - o - p - r - s - t - u - v - w
This document was generated on 17 August 2000 using texi2html 1.56k.